Precautions for using the polishing machine!

In addition to the quality of the polishing machine when leaving the factory, the quality of the polishing machine is related to the use, maintenance, cleaning, and operation of the product. It is very important to maintain the polishing machine often, and it will have different effects, especially Wax dust in the chassis to prevent sedimentation; pay attention to whether there are entanglements such as debris or yarn under the pad of the polishing machine, which increases resistance, increases the sound of the motor, and causes the belt to break.

   1. The equipment is not allowed to polish on the wooden floor.

   2. For hard ground polishing, the slope of the ground cannot exceed 2%.

   3. During the use, pay attention to whether there is any debris under the equipment, etc., and check it before starting.

   4. Before starting the work, check the wires and cables. The wires must not be bent excessively, and they are not allowed to wear.

   5. When the machine is stopped, the handle must be released after the high-speed polishing machine has completely stopped rotating. Do not use a polishing pad with dust or dirt on it. Replace the polishing pad when it is too dirty to clean. When replacing or installing the polishing pad, the power must be turned off.

   6, regular polishing and maintenance of the polishing machine, especially for the cleaning of the machine chassis, such as wax dust to prevent precipitation.