Why do we need precision metal polishing machines for electronic products?

Different metal surface effects will be produced according to the designer's design. There are different surface effects, such as sandblasting effect, mirror effect, anode effect, sand effect, drawing effect and so on. Different effects require different processes, and the precision of the polishing machine will also be different.

       Just like the hardware of the bathroom handle and the lock handle, compared to electronic products, the accuracy is not so high, because when the electronic products are assembled, the parts are relatively small. If the corners cause the tread, the angle or the thickness of the holes In the case of a large difference, the electronic components may not be installed, which will cause a relatively large scrap rate of the product. Therefore, according to this situation, our engineers have designed special metal precision polishing machines for polishing electronic products, such as watch cases, mobile phone cases, camera covers, and charger cases. This is a CNC polishing machine, which mainly uses the servo motor to grind the corner of the entire product. The servo motor can be well controlled in terms of angle and speed to keep the polishing thickness of the surface in the same range of 1-2 μm. If the customer requires deeper cutting, we can also adjust the equipment according to the customer's requirements. Electronic products have high surface requirements and high sensitivity of servo motors. Sanding using a metal precision polisher.