What problems should be paid attention to when installing a flat metal polishing machine?

What is the relationship between the operation of the flat metal polishing machine and the polishing environment? What are the requirements for polishing equipment during operation? Is it stable? In fact, these are not only related to the equipment, but also to the environment where the polishing equipment is installed.

In the multi-station flat metal polishing machine equipment, the placement of the location will affect the operation of the polishing equipment. A piece of equipment is mainly divided into 3 parts, the mechanical part, the electrical control part, and the isolation studio. Later operations will also cause certain dangers. The polishing machine head mainly determines the placement of each polishing station according to the polishing process, first rough polishing, to middle polishing, and then to fine polishing. Arrange the machine head neatly according to the assembly line, and arrange the lines well to avoid obstructing work during maintenance and inspection. If you accidentally stumble, it will cause hidden safety hazards.

When installing a flat metal polishing machine, pay attention to changes in the environment. Do not install the equipment directly or near a heat source. The ambient temperature is best controlled at 5 ℃ -40 ℃. If the humidity is high, try to control the relative humidity below 75%, otherwise it will affect the operation of the equipment. If possible, do not install near the source of the earthquake. If it must be installed, you must dig trenches or test measures around the machine to prevent shock. The ground needs to be firm and level to prevent the machine from sinking or tilting, and to avoid affecting the polishing accuracy. Another point is that there must be no water on the ground. It is very dangerous to have water when the power is on. Pay attention to leakage protection. When installing, you must connect the electrical control cabinet according to the wiring requirements, and you must ensure that the ground connection is correct.

Someone tried to debug the device before. After debugging a few times, I found that the device was still uneven. I measured it with a ruler and finally knew the reason. It turned out that the device was abnormal because of uneven ground. Therefore, we will remind customers before going out to ensure that the ground is flat and there can be errors, but we want to reduce this error and let the equipment show better results.

 Pay attention to these installation details during polishing to avoid affecting the final polishing effect of the product, make better use of the equipment, and maximize the function of the equipment.

       Yatai automatic polishing machine, automatic polishing machine manufacturer for 15 years producing metal polishing machine, cooperated with Fortune 500 companies, mainly polishing metal products, such as stainless steel pots, door handles, sanitary ware, kitchenware, sold at home and abroad, delivery time Short, the products include flexible automatic metal polishing machine, CNC 6-axis polishing machine, disc polishing machine and car luggage rack polishing machine, and can also customize exclusive polishing equipment.

        Flexible metal polishing machine: efficient, dust-free, no polishing workers, fool-type operation, can polish 300 zinc alloy handles per hour.