Bathroom automatic polishing machine YT-B109

Bathroom automatic polishing machine

Performance parameters:

1. Equipment name: Automatic polishing machine for bathroom

2. Equipment model: YT-B109

3. Power supply: 380V 50HZ

4. Speed of polishing wheel: variable frequency adjustment

5. Dimensions: length × width × height = 1900 × 1200 × 1900 mm

6. Effect requirements: bright light, mirror light

7. Estimation of efficiency: The fastest polishing of a product is completed in about 3 to 5 seconds, and the operation is circular, with one operator

Performance characteristics:

1. Automatic polishing force compensation system to ensure stable polishing quality.

      2.Automatic wax spray function

      3. Automatic cloth wheel loss compensation

      4. Automatic fault alarm

5. The workpiece is mounted on the fixture of the workpiece shaft and driven by a reduction motor, and then the entire mobile table is pulled under the cloth wheel by the oil cylinder at the bottom. At this time, the cloth wheel is pressed to the workpiece surface to polish it.

 6. During the polishing process, there is a swing oil cylinder under the moving table to drive it to shake, so as to eliminate the wear marks.

 7. The entire working procedure is automatically completed by PLC control.

 8. The worker only needs to load the workpiece, press the button, and then remove the workpiece after polishing.

 9. This equipment is an upgraded version of YT-B105 equipment, and its efficiency is 2 times.

Applicable Products:

Various types of bathroom faucet products, bathroom handle products, bathroom accessories products, hardware accessories